|
Diagnostic Trouble Code: B1300
Diagnostic Trouble Code Name: Power Door Lock Circuit Failure Door Lock Motor Error / Driver?s door lock feedback did not change after lock action, External Fault
Vehicle Make: Ford
Vehicle Model: Falcon (FG)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Reverse Inhibit Solenoid Control Circuit
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTCP0801
Circuit / System Description
With the ignition ON battery voltage is supplied directly to the reverse inhibit solenoid. The powertrain control module (PCM) controls the solenoid by grounding the control circuit via an internal switch called a driver. The driver supplies the ground for the component being controlled. Each driver has a fault line which the PCM monitors. When the PCM commands a component ON, the voltage of the control circuit should be low (near 0?volts). When the PCM commands the control circuit to a component OFF, the voltage potential of the circuit should be high (near battery voltage). If the internal fault detection circuit senses a voltage other than what is expected, the fault line status changes causing the DTC to set.
|
