Welcome Anonymous !

Everything you need to modify your ride
 

Home

Diagnostic Trouble Code Results for B0086 for the Daewoo Veritas (VE)

Veritas (VE) Daewoo

Diagnostic Trouble Code: B0086

Diagnostic Trouble Code Name: Front Passenger Side Impact Sensor Circuit

Vehicle Make: Daewoo

Vehicle Model: Veritas (VE)

Diagnostic Code Entered By: ZerOne

Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm

Please Note: The DTC Information provided has been randomly generated.

To view the correct Diagnostic Code Information, Please Login, or Register.

 

Diagnostic Trouble Code Description: 

Trans Mode Switch B circuit

Possible Sensor Faults
TCM

Possible Related Diagnostic Trouble Codes
DTC P071D

Circuit / System Description
The sport and economy shift modes allow driver selection of 2 different shift patterns. Sport mode programming in the transmission control module?(TCM) increases transmission line pressure and extends shift points for performance enhanced driving. In the economy mode, the TCM uses standard programming, permitting normal line pressure and shifting. The sport mode switch is a console mounted momentary contact switch located on or near the electronic PRNDL assembly. Accessory voltage is supplied to the electronic PRNDL assembly through the ELEC PRNDL fuse. When the sport mode switch is depressed, it momentarily contacts the switch signal circuit. The rear integration module?(RIM) recognizes the voltage on the circuit and sends a class?2 serial data message to the dash integration module?(DIM). The DIM sends a class?2 message to the engine control module ?(ECM). The ECM sends a request to the transmission control module?(TCM) through the controller area network?(CAN) to enable the sport mode program.

The TCM evaluates the request, and if operating conditions are correct for enabling the program, the TCM sends a confirmation message to the ECM. The ECM then requests the instrument panel cluster?(IPC) to illuminate the sport mode indicator.

The sport mode feature remains enabled until the sport mode switch is pressed again. Once disabled, the TCM will return to the economy mode programming.

  • View new posts
  • View unanswered posts
  • Who is online
  • Statistics
  • In total there are 193 users online :: 2 registered, 0 hidden and 191 guests (based on users active over the past 5 minutes)
  • Most users ever online was 405 on Sat Mar 30, 2024 1:42 am
  • Registered users: Bing [Bot], Google [Bot]
  • Total posts 6776
  • Total topics 671
  • Total members 62803
  • Our newest member Dazzak