Welcome Anonymous !

Everything you need to modify your ride
 

Home

Diagnostic Trouble Code Results for B0193 for the Holden Commodore (VE)

Commodore (VE) Holden

Diagnostic Trouble Code: B0193

Diagnostic Trouble Code Name: Blower Motor Not Operating

Vehicle Make: Holden

Vehicle Model: Commodore (VE)

Diagnostic Code Entered By: ZerOne

Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm

Please Note: The DTC Information provided has been randomly generated.

To view the correct Diagnostic Code Information, Please Login, or Register.

 

Diagnostic Trouble Code Description: 

Headlamp Washer Relay Circuit

Possible Sensor Faults
Body Control Module

Possible Related Diagnostic Trouble Codes
DTC B3810

Circuit / System Description
The Body Control Module (BCM) controls the washer motor based on an input from the windshield wiper washer switch. The BCM monitors the washer switch through the windshield washer switch signal circuit. When the WASH switch is closed, ground is supplied to the front washer switch signal circuit. When this is seen, the BCM will command the front washer fluid pump and the low speed wipers on. When Headlamp Wash Equipped, the headlamps shall be sprayed with wash fluid as a result of an extended Windshield Wash Switch Activation. In order to preserve wash fluid, the feature shall only be allowed to activate if the Low or High Beam Headlamps are active. In addition, after the initial Headlamp Wash operation has been performed, additional headlamp washes shall not be performed for the next 4 Windshield Wash activations or for 48 hours whichever comes first.

  • View new posts
  • View unanswered posts
  • Who is online
  • Statistics
  • In total there are 531 users online :: 1 registered, 0 hidden and 530 guests (based on users active over the past 5 minutes)
  • Most users ever online was 684 on Sun Apr 28, 2024 1:35 pm
  • Registered users: Bing [Bot]
  • Total posts 6776
  • Total topics 671
  • Total members 62803
  • Our newest member Dazzak