|
Diagnostic Trouble Code: B0408
Diagnostic Trouble Code Name: Drivers Air Mix Door Motor Circuit
Vehicle Make: Holden
Vehicle Model: Commodore (VE)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Heater Control Bank 2 Sensor 1
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTCP0030, P0036, P0050, or P0056
Circuit / System Description
Heated oxygen sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensor to reach operating temperature. Voltage is provided to the heater by the ignition?1 voltage circuit through a fuse. With the engine running, ground is provided to the heater by the HO2S heater low control circuit, through a low side driver within the engine control module (ECM).
The ECM commands the heater ON or OFF to maintain a specific HO2S operating temperature range. The ECM monitors the voltage on the HO2S heater low control circuit for heater fault diagnosis. If the ECM detects that the HO2S heater low control circuit voltage is not within a specified range, DTC?P0030 sets for HO2S bank?1 sensor?1, DTC?P0036 sets for HO2S bank?1 sensor?2, DTC?P0050 sets for HO2S bank?2 sensor?1, or DTC?P0056 sets for HO2S bank?2 sensor?2.
|
