Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Keyless Entry Transmitter Synchronization Failure
Possible Sensor Faults
Intelligent Switching Unit
Possible Related Diagnostic Trouble Codes
DTC 024
Circuit / System Description
Synchronization may be necessary under the following conditions:
If the immobilizer programming procedure has been performed.
If the transmitter is activated more than 255?times while the transmitter is out of range of the intelligent switching unit antenna.
Synchronization may be necessary due to the security method used by the remote keyless entry system. The transmitter does not send the same signal twice to the intelligent switching unit (ISU).
The ISU will not respond to a signal that has been sent previously. This prevents anyone from recording and playing back the signal from the transmitter.
The battery in the transmitter was replaced.
The battery in the vehicle has been in a low or no charge condition for an extended period of time.
