|
Diagnostic Trouble Code: B0080
Diagnostic Trouble Code Name: Passenger Seat Position Sensor Circuit
Vehicle Make: Chevrolet
Vehicle Model: Camaro (Fifth Generation)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
MAP/Barometric Pressure Circuit Low Input
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTCP0107
Circuit / System Description
The manifold absolute pressure (MAP) sensor responds to pressure changes in the intake manifold. The pressure changes occur based on the engine load. The MAP sensor has the following circuits:
5-volt reference circuit
Low reference circuit
MAP sensor signal circuit
The engine control module (ECM) supplies 5?volts to the MAP sensor on the 5-volt reference circuit. The ECM also provides a ground on the low reference circuit. The MAP sensor provides a signal to the ECM on the MAP sensor signal circuit which is relative to the pressure changes in the manifold. The ECM should detect a low signal voltage at a low MAP, such as during an idle or a deceleration. The ECM should detect a high signal voltage at a high MAP, such as the ignition is ON, with the engine OFF, or at a wide open throttle (WOT). The MAP sensor is also used in order to determine the barometric pressure (BARO). This occurs when the ignition switch is turned ON, with the engine OFF. The BARO reading may also be updated whenever the engine is operated at WOT. The ECM monitors the MAP sensor signal for voltage outside of the normal range.
If the ECM detects a MAP sensor signal voltage that is excessively low, DTC?P0107 sets.
|
