|
Diagnostic Trouble Code: B0019
Diagnostic Trouble Code Name: Passenger Frontal Deployment Loop Stage 1
Vehicle Make: Holden
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Generator L-Terminal Circuit High Voltage
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P1668, P2500, or P2501
Circuit / System Description
The engine control module (ECM) uses the alternator turn ON signal circuit to control the load of the alternator on the engine. A high side driver in the ECM applies a voltage to the voltage regulator. This signals the voltage regulator to turn the field circuit ON and OFF. The ECM monitors the state of the alternator turn ON signal circuit. The ECM should detect low voltage on alternator turn on signal circuit when the ignition is ON and the engine is OFF or when the charging system malfunctions. With the engine running, the ECM should detect high voltage on the alternator turn on signal circuit. The ECM performs key ON and RUN tests to determine the status of the alternator turn on signal circuit.
|
