|
Diagnostic Trouble Code: B001A
Diagnostic Trouble Code Name: Driver Seat Belt Pretensioner Deployment Loop 2
Vehicle Make: Chevrolet
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Throttle Position (TP) Sensor 2 Circuit High Voltage
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTCP0223
Circuit / System Description
The throttle body assembly contains 2 throttle position (TP) sensors. The TP sensors are mounted to the throttle body assembly and are not serviceable. The TP sensors provide a signal voltage that changes relative to throttle blade angle. The engine control module (ECM) supplies the TP sensors with a common 5-volt reference circuit, a common low reference circuit, and 2?independent signal circuits.
The TP sensors have opposite functionality . TP sensor?1 signal voltage decreases from above 4?volts at idle to below 1?volt at wide open throttle (WOT). TP sensor?2 signal voltage increases from below 1?volt at idle to above 4?volts at WOT.
If the ECM detects TP sensor?2 signal voltage is too low, this DTC sets.
|
