Diagnostic Trouble Code: B001A
Diagnostic Trouble Code Name: Driver Seat Belt Pretensioner Deployment Loop 2
Vehicle Make: Holden
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Engine Controls Ignition Relay Control Circuit
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P068A, P068B, or P2510
Circuit / System Description
The Engine Controls Ignition Relay or Main Relay, is controlled by the engine control module (ECM) depending upon input from the ignition switch. Battery positive voltage is supplied to the relay coil and switch. When the ignition switch is turned to the ON position, the ECM will provide ground on the control circuit of the relay using a low side driver. This will allow voltage through the relay switch contacts to the components. The ECM monitors the voltage level on the control circuit of the relay.
|