|
Diagnostic Trouble Code: 033
Diagnostic Trouble Code Name: Immobilizer Antenna Incorrect Value
Vehicle Make: Chevrolet
Vehicle Model: Epica (V250)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Brake Switch Circuit 1 High Voltage
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P0573
Circuit / System Description
The brake pedal position sensor is used to sense the action of the driver\'s application of the brake pedal. The brake pedal position sensor provides an analog voltage signal that will increase as the brake pedal is applied. The brake pedal position sensor receives a low reference signal and a 5-volt reference voltage from the BCM when the driver applies the brakes. When the variable signal reaches a voltage threshold indicating the brakes have been applied, the BCM will apply battery voltage to the stop/turn signal voltage supply circuit to illuminate the stop lamps and the center high mounted stop lamp (CHMSL). The BCM also sends a brake pedal position sensor signal to the engine control module (ECM) as well as a serial data message to indicate the application of the brake pedal.
|
