|
Diagnostic Trouble Code: 112
Diagnostic Trouble Code Name: Intake air temperature signal (IAT) circuit low input.
Vehicle Make: Ford
Vehicle Model: Falcon (EF)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Diesel Particulate Filter Differential Pressure Sensor
Performance
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P244A, P244B, or P2453
Circuit / System Description
The diesel exhaust after-treatment system consists of an under hood pre-catalytic converter and an underbody catalytic converter. The underbody catalytic converter also consists of the main Diesel Oxidation Catalyst (DOC) and the coated Diesel Particulate Filter (DPF). One of the main purposes of the DPF is to collect particulates from the engine exhaust in order to minimize discharge of soot to the atmosphere. The soot particles accumulate in the channels of the DPF and are burned off at regular intervals through a process called regeneration. This prevents the DPF from clogging. The ECM commands the DPF regeneration after calculating various vehicle conditions such as DPF pressure difference, exhaust gas temperature, engine oil quality, engine speed, etc. Excessive accumulation of the soot in the DPF can cause a drop in the engine performance. During regeneration, additional fuel is injected via multiple post injections in order to increase the exhaust gas temperature. During this period, the DPF temperature is raised to approximately 600?C and the accumulated soot is oxidized or burned off into carbon dioxide (CO2).
The pressure pipes, which are connected to the DPF pressure sensor, measure the level of soot deposit in the DPF and protect the engine by triggering regeneration when critical soot level is detected in the filter.
|
