Welcome Anonymous !

Everything you need to modify your ride


GM Lan Single Wire CAN Bus Sniffing

Discuss Diagnostic Trouble Codes and Parameter IDs for the Holden VE Commodore, VEII Series Commodores, and HSV E1, E2, and E3 models

Postby GXP25 » Thu May 17, 2018 10:36 am

Some clarification... better late than never....

0x102e2094, 0x24 opens up RGBS with the HVAC bar at the top of the screen.

0x102e2094, 0x25 opens up RGBS without the HVAC bar at the top of the screen.

Both can be used so that when the "NAV" button is pressed, the HVAC bar gets exposed and hidden while using the RGBS input.

I'm almost done with my code. I'm just having an issue detecting a button press while in NAV/RGBS mode.
Kicking Tyres
Posts: 7
Joined: Mon Oct 19, 2015 1:08 pm
Has thanked: 1 time
Been thanked: 2 times

Postby vkfkbr » Mon May 28, 2018 1:00 am

I have a problem about that topic;

For example, when I press "parking lights button" canbus sends that message;

id=1020c040 data= 00 44 04 88 01

but when i send that message to car with arduino, headlights don't work. interior dashboard light turns on, screen brightness of radio dimming but exterior bulp don't give a reaction.

how can I solve that?

2012 Chevrolet Cruze Diesel
Newbie Modder
Posts: 1
Joined: Thu Apr 26, 2018 4:45 am
Has thanked: 0 time
Been thanked: 0 time


Return to ECU - OBDII DTCs and PIDs

  • View new posts
  • View unanswered posts
  • Who is online
  • In total there are 3 users online :: 1 registered, 0 hidden and 2 guests (based on users active over the past 5 minutes)
  • Most users ever online was 151 on Fri Mar 03, 2017 1:44 pm
  • Users browsing this forum: Bing [Bot] and 2 guests