TazzI wrote:Dicko101 wrote:Ok, so I connect the wires for VGA (R, G, B and sync I presume?) and if I earth NAV select I should get auxiliary video and audio through the nav inputs, it will presumably combine the nav audio from the nav audio input with the selected source since nav usually speaks over audio.
Yeah thats right!. The secondary video will display up. Just earthing the select with nothing else connected will be a blank screen. Thats how I did it for the BA/BF's.Dicko101 wrote:I have factory reverse camera so that doesn't matter. Does anyone know what plugs are required for a harness? Also, does anyone know where to get a male and female plug that connects the speakers wires to the ICC? I'm going to also make a harness to integrate an amplifier and patch it into the factory connections.
I don't think anyones going to give that information up freely. I literally just spent $100+ on various different plugs to see if any of them are the right size/fit, pretty much went for anything that was about the right dimensions and pinout.
I might get 1 plug correct.. or all... or possibly none and be a waste of $100+. All part of the joys of R&D.
Anyone providing the plug'n'play harnesses have probably had to do the same thing, so they wont be giving up that information.
Cool, might get onto it and sort out a car pc. Yeah maybe I'll see if I can find one at a wreckers or something, or I'll just have to cut and add in an off the shelf plug and socket a couple of inches from the factory one, would prefer the first option obviously.