Welcome Anonymous !

Everything you need to modify your ride
 

Interior Modifications

VE Factory Body Control Module Information

Specific interior modification information for Holden Commodore VE and VEII Series Commodores, and HSV E1, E2, and E3 models

Postby 1johnboy » Tue Oct 07, 2014 6:02 pm

I am just wanting someone to clear up the fog light loom if my understanding of it is correct. Connector 86 from the relay goes to pin 11 connector 4, and pin 6 from the the foglight runs to pin 21 connector 3?

If this is correct what do you guys usually use for the pins. I cant seem to source suitable ones anywhere
1johnboy
Newbie Modder
 
Posts: 2
Joined: Mon Aug 18, 2014 11:54 am
Has thanked: 0 time
Been thanked: 0 time

Postby silversv6 » Wed Oct 08, 2014 8:06 am

If you can't find the pins, source an old harness (wreckers etc) with the correct pins & solder them to your harness. cheers
User avatar
silversv6
Major Contributor
 
Posts: 225
Images: 0
Joined: Fri Jan 18, 2013 2:55 pm
Location: GRAFTON
Has thanked: 0 time
Been thanked: 15 times

Postby 1johnboy » Wed Oct 08, 2014 10:23 am

Is my interpretation of the wiring diagram correct?
1johnboy
Newbie Modder
 
Posts: 2
Joined: Mon Aug 18, 2014 11:54 am
Has thanked: 0 time
Been thanked: 0 time

Postby Annz6056 » Thu Oct 09, 2014 11:34 pm

Hey dose anyone out there have a wiring diagram for the factory ve ss can sum one help me out it's for the 2008 model
Annz6056
Newbie Modder
 
Posts: 2
Joined: Thu Oct 09, 2014 7:45 pm
Has thanked: 0 time
Been thanked: 0 time

Postby Annz6056 » Thu Oct 09, 2014 11:35 pm

Sori that for the head unit
Annz6056
Newbie Modder
 
Posts: 2
Joined: Thu Oct 09, 2014 7:45 pm
Has thanked: 0 time
Been thanked: 0 time

Postby nathanb » Sat Mar 26, 2016 5:19 pm

Hi all.
Have a 2006 omega and upgrading fogs.
Wondering if anyone can help with pics of the switch from behind and confirm if its the number 6 pin on the switch is the fog active? Or a diagram would be great.
Any help would be awesome.
Cheers in advance
nathanb
Newbie Modder
 
Posts: 1
Joined: Sat Mar 26, 2016 5:00 pm
Has thanked: 0 time
Been thanked: 0 time

Postby BRAD36L » Tue May 17, 2016 4:19 am

hi guys need full diagram for ve sv6 ecu and bcm not sure if bcm is the same pin out as others.
need to work out what to do, to get it to run by it self not sure if i can git to run or not.
holden will not help out with what i want.. Bosch computers from vz ve v6 are hard to do by the looks of it.
not sure if i can remove the VATS off the ecu before i pull it out of the car. or if you can at all.
i do a lot of mods on car and this is going in an old hi-lux
i do know of some one who can wire in the dash, bcm ecu, and i'm guessing he was going to do the key reader too. so it all works. also it"s auto so the sport shift will work to
$1200 was the price
but i know i can do it and want to.
so guys all the help i can get would be great, cheers thanks heap all for reading
BRAD36L
Newbie Modder
 
Posts: 1
Joined: Thu May 05, 2016 11:17 pm
Has thanked: 0 time
Been thanked: 0 time

Postby antwon » Tue Jun 06, 2017 7:05 pm

ZerOne wrote:The VIN Number is located at EEPROM Locations

0x01E -> 0x02E (Full 17 Digit VIN Number)
and
0x0F6 -> 0x106 (Full 17 Digit VIN Number)

I can also confirm that I am able to read from, and write to the EEPROM using the KeeProg EEPROM programmer using the above settings,
without having to remove the EEPROM from the board. (However I needed to remove the resin from the chip to make a good electrical contact).

(Will try the GQ-4X EEPROM programmer next, to see if it can read and write whilst on the board)...
For anyone that wants to play at home, the EEPROM location is here.

15574 15573


Hi great info top job Ive got a question I'm trying to find the location for the bcm sec code does anyone have an idea weee it may be
antwon
Newbie Modder
 
Posts: 2
Joined: Tue Jun 14, 2016 8:10 pm
Has thanked: 0 time
Been thanked: 0 time

Postby TazzI » Wed Jun 07, 2017 6:53 pm

Not something I've actually looked for previously. Will probably need to know what that value is first before being able to search it in the eeprom dumps.
User avatar
TazzI
Moderator
 
Posts: 965
Images: 2
Joined: Thu Dec 22, 2011 8:02 pm
Has thanked: 16 times
Been thanked: 41 times

Postby jezzab » Thu Jun 08, 2017 8:44 am

There is no security code in the VE BCM
Daily Ute - 2009 Holden VE SSV Ute Single Turbo (IQ, E3 Cluster, EDI) - 586rwhp
Drag Ute - 2002 Holden VU SS Twin Turbo - 1010rwhp [SOLD]

All VE/VF Module reprogramming. Remote programming with flash box
http://www.facebook.com/jsbperformance
User avatar
jezzab
Site Admin
 
Posts: 1031
Joined: Sun Nov 20, 2011 9:42 pm
Location: Melbourne
Has thanked: 42 times
Been thanked: 26 times

PreviousNext

Return to Interior Modifications

  • View new posts
  • View unanswered posts
  • Who is online
  • In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
  • Most users ever online was 151 on Fri Mar 03, 2017 1:44 pm
  • Users browsing this forum: No registered users and 1 guest