Hey all
I picked up a 3-gauge atari style SIC for the costly price of $15 off ebay
Problem is when it got to my place it has a few deep scratches on the LCD panel, which will annoy me if I installed it like that
My question, having popped the black plastic cover off the SIC, it appears the main board is held into place by 4x bent and soldered tabs to the main silver chassis, a couple of clips to the main SIC body, and obviously the LCD ribbon cable also runs to the board.
If I were to swap these main boards, so the 3 gauge board is married to my existing 2-gauge LCD panel and chassis, can I expect any troubles or should it work? Theoretically the LCD is the same, its either the board or the programming of the boards that's different and I'm replacing this in its entirety.
I don't want to go to all the effort of stripping down and rebuilding a couple of SICs if someone knows for a fact that it wont work for some reason, but I'm happy too if someone can confirm it will work so I don't have a few dirty scratches annoying me for the rest of the life of the car.
Cheers