Home

Shout out to matti, Jez or any of the other tech boys, after doing the wagon I've upgraded the wm to IQ also... having couple strange things.

It's all in and programmed, running and working well...except for the DVD display from roof mount DVD player. Now the picture is displaying on head unit perfectly, (rear monitors are showing white lines which is strange as they were fine when I pulled the series one unit out last week so I'll swap new ones in to ensure that's the typical monitor issue) but there is a constant interference sound coming thru the speakers, regardless of whether the car is running or not. Like a cycling interference you used to hear in old cars with aftermarket head units etc. Anyone have any ideas what could be the culprit? I've gone over the pinouts and double checked every wire and it's spot on as fas as I can see ..when you push headphones button sound comes from front centre speaker and interference in that also.

Next issue is the reverse camera wiring for the WM...now here's the difference the wm reversing camera has completely different wiring colours. Does anyone have the pinouts for wm?

At the cam plug on a spare WM camera I have : light green, light blue, white, black, pink and red .

At the cam plug on the camera fitted to original WN mould I have fitted I have : 2x black, white, brown, yellow and a red. Any assistance would be great for this one lads! Been scouring the net for days and not a single reference...I've done my due diligence lol

Cheers in advance!

Todd

Comments: 0 :: View Comments (Post Comment)

Hey guys, I recently had VIM activated and wanted to install a Wii in my glove box.

I have a reverse camera so I spliced into that plug and connected a Composite av plug, which worked perfectly.

I then found the pinout for DVD audio on the X4 connector:
Right + : pin 10
Left + : pin 5
gnd - : pin 6

As I didnt have wires in those locations I found the terminal pins on rs-online (stock number: 681-2783)
I ordered x10 for 11 aud, and they arrived in a few days.

I connected the red and white av plugs to the terminal pins and plugged them into the X4 connector but I am getting no audio.

I have looked at the X3 connector and have see some DVD audio output pins, am I missing something, do i have to connect these to somewhere?

Cheers Vaughan.

Comments: 0 :: View Comments (Post Comment)

How I can fix these error codes and what is required for it? Holden Commodore 2007 Sv6

P0121 and P0221 Error Code
I have already bought used throttle body. Is it the only thing that I need to replace in my car?

Comments: 0 :: View Comments (Post Comment)

I thought you guys may have come across this before. I have a holden 2010 series 1 SSV Ute with a Blaupunkt head unit. Problem is the on/off switch on the unit does not work (volume part does work).

Is there a button combination that will fix this or someway of getting into the engineering mode to correct it. or has the switch failed in the on position?
I can turn it off only by removing key and opening drivers door.
Any clues you may have would be appreciated, thanks

Comments: 0 :: View Comments (Post Comment)

Hi i hope you can help me like to add a head up display for a ve calais 2006

Comments: 0 :: View Comments (Post Comment)