|
Diagnostic Trouble Code: B0052
Diagnostic Trouble Code Name: Deployment Commanded
Vehicle Make: Holden
Vehicle Model: Commodore (VE)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Humidity Sensor Temperature Circuit
Possible Sensor Faults
Heater and Blower and Air Conditioning Control Module
Possible Related Diagnostic Trouble Codes
DTC B018A, B048C, B048F, or B1395
Circuit / System Description
The windshield temperature and inside moisture sensor integrates the relative humidity sensor, windshield temperature sensor and humidity sensing element temperature sensor.
This sensor assembly provides information about:
Relative humidity level on inside windshield
Temperature of the inside windshield
Temperature of the humidity sensor element
The relative humidity sensor measures the relative humidity on the compartment side of the windshield. It also detects the temperature of the windshield surface on the compartment side. Both values are used as control inputs for the HVAC control module application to calculate the fog risk on windshield compartment side and ability to reduce fuel consumption by decreasing A/C compressor power to a minimum without causing any fog. The sensor will also enable partial recirculation mode in order to improve heat-up performance of the passenger compartment under cold ambient temperature conditions without the risk of mist build-up on the windshield. The humidity sensor element temperature sensor supplies the temperature of the humidity sensor element. It is only needed if the thermal contact between the humidity sensing element and the inside windshield surface is not sufficient.
|
