Diagnostic Trouble Code: B0055
Diagnostic Trouble Code Name: Side Airbag Deployment Commanded
Vehicle Make: Daewoo
Vehicle Model: Veritas (VE)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Vehicle Speed Output Circuit 1
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTCP0608
Circuit / System Description
The powertrain control module (PCM) creates the vehicle speed output signal by pulsing the circuit to ground. The PCM monitors the voltage on the vehicle speed output circuit. If the PCM determines that the voltage is out of the normal operating range, a DTC sets.
Various components apply a voltage to the vehicle speed output circuit. The PCM creates the vehicle speed output signal by rapidly grounding this circuit via an internal switch called a driver. The driver operates at the same rate as the vehicle speed sensor (VSS) signal input. The various components recognize the voltage being pulled to ground as an indication of vehicle speed. The PCM driver supplies the ground for the component being controlled. Each driver has a fault line which the PCM monitors. When the PCM commands a component ON, the voltage of the control circuit should be LOW (near 0?volts). When the PCM commands the control circuit to a component OFF, the voltage potential of the circuit should be HIGH (near battery voltage). If the fault detection circuit senses a voltage other than what is expected, the fault line status changes causing DTC?P0608 to set.
|