|
Diagnostic Trouble Code: 0018
Diagnostic Trouble Code Name: Driver Deployment Loop Short to Ground Current
Vehicle Make: Holden
Vehicle Model: Commodore (VZ)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Skip Shift Solenoid Control Circuit Low Voltage
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P080C or P080D
Circuit / System Description
Ignition voltage is supplied directly to the skip shift solenoid. The engine control module?(ECM) controls the skip shift solenoid by grounding the control circuit via an internal switch called a low side driver. The low side driver has a fault line which monitors the control circuit. When the ECM commands the skip shift solenoid ON, the voltage on the control circuit should be low, near 0?V. When the ECM commands the control circuit to the skip shift solenoid OFF, the voltage should be high, near battery voltage.
|
