Welcome Anonymous !

Everything you need to modify your ride
 

Home

Diagnostic Trouble Code Results for 0033 for the Daewoo Statesman (VZ)

Statesman (VZ) Daewoo

Diagnostic Trouble Code: 0033

Diagnostic Trouble Code Name: Pass. Deployment Loop Short to Batt. Current

Vehicle Make: Daewoo

Vehicle Model: Statesman (VZ)

Diagnostic Code Entered By: ZerOne

Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm

Please Note: The DTC Information provided has been randomly generated.

To view the correct Diagnostic Code Information, Please Login, or Register.

 

Diagnostic Trouble Code Description: 

Front Washer Request Signal Circuit

Possible Sensor Faults
Body Control Module

Possible Related Diagnostic Trouble Codes
DTC 022

Circuit / System Description
At the windshield wiper/washer, circuit terminal?4 splits into two circuits, a control circuit going to the windshield washer pump and a signal circuit going to the BCM. The BCM monitors the windshield washer signal circuit, when the windshield washer switch is open, signal circuit voltage will be at or near 0 volts. When windshield washer switch is closed, ignition voltage will flow through the control/signal circuit to the windshield washer pump and to the BCM. The BCM will detect the ignition voltage in the signal circuit and will then command the windshield wipers to function on low for as long as there is ignition voltage on the signal circuit. When the windshield washer switch is open, the voltage on the signal circuit drops to less than 1V and the BCM will then command the windshield wiper to function for 2 more cycles then command the windshield wipers to park.

  • View new posts
  • View unanswered posts
  • Who is online
  • Statistics
  • In total there are 172 users online :: 1 registered, 0 hidden and 171 guests (based on users active over the past 5 minutes)
  • Most users ever online was 405 on Sat Mar 30, 2024 1:42 am
  • Registered users: Bing [Bot]
  • Total posts 6776
  • Total topics 671
  • Total members 62803
  • Our newest member Dazzak