|
Diagnostic Trouble Code: B0014
Diagnostic Trouble Code Name: Driver Side Deployment Loop
Vehicle Make: Chevrolet
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Interior Trunk/Liftglass/Hatch Release Switch Circuit
Possible Sensor Faults
Body Control Module
Possible Related Diagnostic Trouble Codes
DTC B2730
Circuit / System Description
When the ignition is ON, the body control module (BCM) supplies a signal to the rear compartment lid release switch through the trunk release switch signal circuit. When the rear compartment lid release switch is pressed, the voltage within the signal circuit is pulled low and in response, the BCM applies ground to the trunk release relay control circuit, which energizes the coil side of the trunk relay. The switch side of the trunk relay then closes, supplying battery positive voltage through the relay and the latch motor voltage control circuit to the rear compartment lid latch. The rear compartment lid latch, then releases the rear compartment lid so that it may be manually raised to an open position.
|
