|
Diagnostic Trouble Code: B0019
Diagnostic Trouble Code Name: Passenger Frontal Deployment Loop Stage 1
Vehicle Make: Holden
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Front Wiper Function Select Circuit
Possible Sensor Faults
Body Control Module
Possible Related Diagnostic Trouble Codes
DTC B3922
Circuit / System Description
The Body Control Module (BCM) monitors the windshield wiper/washer switch low signal circuit. When the wiper switch is placed in the low position, battery voltage is applied through the switch contacts, a series of resistors, and the wiper switch low signal circuit to the BCM. The BCM then applies battery voltage through the wiper relay control circuit to energize the WIPER LO relay. When energized, battery voltage from the FRT WPR fuse is applied through the switch side of the WIPER LO relay then through the switch side of the WIPER HIGH relay to the windshield wiper motor.
|
