Diagnostic Trouble Code: B001A
Diagnostic Trouble Code Name: Driver Seat Belt Pretensioner Deployment Loop 2
Vehicle Make: Holden
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Throttle Position Sensor 2 Circuit
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC
P0120, P0122, P0123, P0220, P0222, P0223, or P2135
Circuit / System Description
The throttle actuator control (TAC) system uses two throttle position sensors to monitor the throttle position. The throttle position sensors?1 and 2 are located within the throttle body assembly. Each sensor has the following circuits:
A 5?V reference circuit
A low reference circuit
A signal circuit
Two processors are also used to monitor the TAC system data. Both processors are located within the engine control module (ECM). Each signal circuit provides both processors with a signal voltage proportional to throttle blade movement. Both processors monitor each other\'s data to verify that the indicated throttle position calculation is correct.
|