|
Diagnostic Trouble Code: B0085
Diagnostic Trouble Code Name: Left Front Side Impact Sensor
Vehicle Make: Chevrolet
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Transmission Fluid Pressure (TFP) Position Switch Circuit
Possible Sensor Faults
TCM
Possible Related Diagnostic Trouble Codes
DTCP1810
Circuit / System Description
The automatic transmission fluid pressure (TFP) manual valve position switch consists of 5?pressure switches, 2?normally-closed and 3?normally-open, and a transmission fluid temperature (TFT) sensor combined into 1?unit. The combined unit mounts on the valve body. The transmission control module (TCM) supplies ignition voltage for each range signal. By grounding 1?or more of these circuits through various combinations of the pressure switches, the TCM detects which manual valve position you select. The TCM compares the actual voltage combination of the switches to a TFP manual valve position switch combination chart stored in memory.
The TFP manual valve position switch cannot distinguish between PARK and NEUTRAL because the monitored valve body pressures are identical. With the engine OFF and the ignition switch in the ON position, the TFP manual valve position switch indicates PARK/NEUTRAL. Disconnecting the AT inline 20-way connector removes the ground potential for the 3?range signals to the TCM. In this case, with the engine OFF, and the ignition switch in the ON position, D2 will be indicated.
When the TCM detects an invalid state of the TFP manual valve position switch circuit by deciphering the TFP manual valve position switch inputs, then DTC?P1810 sets. DTC?P1810 is a type?B DTC.
|
