Diagnostic Trouble Code: B0088
Diagnostic Trouble Code Name: Right Rear Side Impact Sensor
Vehicle Make: Holden
Vehicle Model: Cruze (J300)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Engine Oil Pressure (EOP) Sensor Circuit Low Voltage
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTCP0522
Circuit / System Description
he engine oil pressure (EOP) sensor is mounted in the top rear of the engine. The EOP sensor measures changes in engine oil pressure. The EOP sensor has a 5-volt reference, a ground and a signal circuit. The EOP sensor changes resistance based on engine oil pressure and is used to determine when the oil pressure is below a certain threshold. When the oil pressure reaches a predetermined value, the powertrain control module (PCM) will determine this as low oil pressure. The PCM will then send a serial data message to the Instrument to activate the Check Oil warning icon. When the PCM senses a signal voltage lower than the normal operating range of the sensor, DTC P0522 will set.
|