by ZerOne » Sat Jul 27, 2013 9:19 am
I was playing around with the keeprog software recently on Windows8
(Yeah, I know, only the insane use that windows 8 pos).
Anyway I could fix the array out of bounds error by running with admin privileges.
This probably won't help you too much with the HVAC module, as it is a pain to program the eeprom on these things.
Your best bet is like what double dip said, get a good quality william programmer, and desolder the eeprom chip to read and write to it.
Having said that, there are different eeprom versions for different sw and hw versions.
So I would suggest that you just obtain a HVAC module from a dz model, and use that as your base.
Sent from my Nexus 10 using Tapatalk HD