I am in the process of transplanting a Stat written off VF HSV GTS in its entirety into a Wagon.
I also have a Stat written off VF SSV Wagon that is providing the donor wiring for the vehicle.
I have added the missing components to the wagon harness from the GTS incl the MRC and the Bose Stereo wiring and the other bits and pieces. Quite a task....
I would like to change the dash so it shows the Wagon when the doors are open and says tailgate rather than boot open.
I have done many mods with eproms with vy/vz but have completely skipped ve....also have a ability to de-solder eproms etc.
I rekon I will wait till its all together or if there is an easy way to power up the cluser may do it before its all together.
Any pointers befoThe mods to the qnx have been done in the states but sending the unit over there seems like a pita,,,,re I attack this would be great.
As this will be effectively a new vehicle I would like to change the vehicle number to gts 001 or even have gts tourer 0001 come up on the mylink but that looks like a much bigger job to modify the mylink/qnx
This has been done in the states but sending the unit to America seems like a pita. I rekon there are not to many peop0le modding their vf's as they are in warranty but I'm happy to pioneer this a little.
I have pulled apart the headunit and there is a 64mb flash chip. Sort of stuck as I rekon you would need to access via jtag etc but I don't have any experience in this. Most 'linux' boxes I access have net/console and can jut connect to make changes.
Cheers in Advance
Chad