daron wrote:well seems the spot ive been looking at might not hold info but checksum info and with the formula its going to be very hard to find i like tazzi idea driving and logging
Bugger driving!
Simulation all the way!
Leave the clip on the cluster, simulate its 1km drive, read eeprom and repeat.
Could be 100% automated using a little bit of programming
Sooo.. If I wanted to do 1km/s.. that would be 60km/min... and 3600km/h
Ok.. thats a little extreme.
So, Lets say we simulate 250km/h... so thats 4.17km/min... which is 0.0694km/second. So every ~15seconds. I will need to stop, take a read and continue again.
Should be able to do roughly 220 reads/hr. And being realistic, 220 different bins is more then enough!