Hi guys,
So a good friend of mine has finished doing a engine conversion on his 2005 VZ Calais but has been unable to start it due to not having modules linked now you would think problem solved as I have a tech 2 Clone that i have "patched" to allow TIS access, But no not the case!
Here is what he has:
VZ Calais 2005 Auto 3.8L >>> VZ Gen IV (LS2) Auto (Manual loom)
Turns out he didn't have the BCM code and couldn't retrieve it as the seller has since changed phone numbers or isn't answering his calls for some reason.
So, He has since purchased all the following NEW: BCM (Lux with bcm code), PIM, Key Head
So i went out there again today to finally get this sorted for him, BUT to link modules i am required to disable the theft deterrent system... Go into program the remote to fix the issue... punch in code... Wrong BCM Code! Hrmmmm
I may also add that to get to here the key has to be ON to read the data, But then the scan tool asks to turn the ignition ON (before i punch in the BCM code) THE KEY IS ALREADY ON... so i cycle the keys off-on and it recognizes the key on but only for a few seconds it seems but it does get me to the BCM code screen. Any ideas why it is doing this i have never had this problem before :S
Any help would be amazing,
Thanks guys
BTW hope this doesn't need to be in Invite only section