by silversv6 » Sat Mar 02, 2013 9:48 am
Thanks doubledip, any thoughts are helpful....right or wrong. I am thinking along the same track as you are anyway. As for the vin #: exactly what I said to the service guy."THAT VIN WON"T WORK IN MY CAR" it like putting the wrong key in a lock....it just don't work. He said that he can only do what the tech guys are telling him. I wouldn't doubt that.
They told me that they have never played with one of these before, only replaced them due to other problems. The other thing is my car is a SV6 anyway, so why would the vin # from that SV6 to mine be any different if they are around the same vintage. Another thing is I know. you and a couple others here are on the ball, a lot more knoweledge than your average holden tech. Did you'se guys learn from a text book or cd or was it from physical "hands-on" & using your brain? I am sure I know what the answer is!!
jezzab: my front speaker was ok before the "update" The problem is that the front centre speaker does not fade out at all, stays the same volume and the back speakers only have 1/4 to 1/2 volume as they used to have. So disconnecting it will not replace the volume into the rear speakers. This has been a common problem after the update or on the later models, as I have never heard of it on the early series II's until they have been updated. There is several complaints on the same problem accross on other forums after the update.
Anyway, everyone keep your thoughts & ideas rolling. You never know, might hit the jackpot. I think doubledip is on the right track. Thanks & cheers. REMEMBER..this is an Instrument cluster swap thread.