Hey Guys,
Appreciate all the feedback.
I agree that the ECU can be reset with the immo code. The 5 speed and six speed TCM can also be reset as well as the IQ (see below).
IMG_0006.JPG
The abs, hvac etc can be fitted to another car without the need for a reset but does need to be flashed to get the matching vin number programmed otherwise a vin mismatch code will be logged. Once it has been programmed, the variant configuration needs to be programmed.
I'm not trying to be Technical Ted here but just relaying my experiences.
In regards to my IQ, I did an in circuit eeprom read on another IQ and was able to get all of the bin codes. As mentioned earlier in my post, when I read the eeprom front m my IQ, all the data fields are blank. Am I able to copy the bin files from the donor IQ and write to my IQ eeprom and then edit the vin number ??
Also was wondering with the IC, if I fit it to a S2 VE and do the variant configurations, can I fit it to my S1 Ve without faults ?. I know I will still get the vin mismatch fault code but this is something I'll have to try and figure out. I appreciate Tazzl telling me how easy it is to remove the needles but I'm still feeling a little sketchy about it. I guess I'll have to find a donor IC to practitioner.
Thanks so much for everybody taking an interest. Please let me know if I can help anyone in some way.
You do not have the required permissions to view the files attached to this post.